News-CMEC AQUA Valve Manufacturing Co.,LTD.

News

High Quality safety valve in CMEC 2018-03-09

Introduction of imported safety valve.Safety valve is open-close part under the action of external force in a normally closed state, when the equipment or piping within the medium pressure than specified value, through a discharge medium system to prevent the pipeline or equipment .

What is the difference between a brass ball valve and a stainless steel ball valve? 2018-02-28

We usually face the question of how to choose the ball valve. The most common occurrences in our daily life are brass ball valves and stainless steel ball valves. Today, CMEC Aqua Valve will give you a detailed look at the definitions and differences between these two valves, as well as how to choose

What is the Best Shut Off Valve 2018-02-02

We often encounter with the phenomenon:the water tap can’t be shut off tightly,which caused the waste of water.For those districts lack of water or whose water cost is very high,this will be really annoying. These shut-off valves overcome both problems. The internal mechanism is a cross-drilled ball that can be fully opened or fully closed in a quarter turn.

Matters Need Attention:EURO Design Brass Stop Valve Installation 2018-01-27

For civil valves,every country has their own design standard.So we have euro design brass stop valves,Asian design stainless stop valves.Today CMEC,a professional supplier of civil valves, is going to have a relatively specific introduction to EURO design brass stop valves installation secrete.

Steps to Replace the Old Stop Valves 2018-01-20

“CMEC VALVE not only provide new quality civil valves,but also give you solutions to replace the old valves.” You can spend time rebuilding the old valve, but the problems will just reappear years from now. The best way to deal with bad valves is to replace them with modern quarter-turn ball valves.

The Standard of Water Flange Ball Valves Installation 2018-01-01

CMEC Valve,as a professional manufacturer of civilian valves, has always been commtting ourselves to provide best quality service to our worldwide customers.Today here CMEC Valve will share with you the installation standard of flange ball valves.

Understanding Check Valves: Sizing for the Application, Not the Line Size 2017-12-22

Check valves are probably the most misunderstood valves ever invented. If you mention check valves to most plant personnel, the typical response is “they don’t work.” In fact, those personnel may well have taken out the internals or re-piped the system to avoid check valves. In other words, these valves are the least popular valve in use today. Want to learn more? Click here to learn more.

Global Ball Valves Market is Projected to Reach at a CAGR of 3.0% During the Forecast Period of 2017 to 2024, According to New Research Study 2017-12-15

The “Global Ball Valves Market”, By Type (Floating, Rising Stem, Trunnion Mounted, Others) By Material Type (Alloy Based, Bronze, Brass, Steel, Cryogenic, Cast Iron, Others), By End-user (Chemicals, Food & Beverage, Pharmaceuticals, Building & Construction, Aerospace & defense, Oil & Gas, Water & Wastewater, Energy & Power, Utilities, Others) By Geography (North America, Europe, Asia-Pacific, Europe, South America, Middle East and Africa) – Industry Trends and Forecast to 2024

WHAT IS A FOOT VALVE? 2017-12-08

How does a vertical turbine pump keep its prime? Once the pump shuts off, doesn't gravity take over and run all the water back into the tank? In this post, learn how foot valves help pumps keep their prime and protect them from damage.

Valve Selection Guide | Factors to consider when choosing valves 2017-11-29

Choosing a valve for a certain application isn’t a beginner’s task. Sometimes an incorrect valve can be selected if you aren’t careful. So, what do you need to know to begin your search for the right valve?

Lead Free Brass, what is it? 2017-11-23

What is lead free brass ball valve? Aqua valve unveiled a line of lead free brass ball valve for customers a few years ago. Valve products contain lead, what is lead? What effects it has? I thought this would be a good time to go over what exactly ”lead-free” means and why it’s important to have a lead-free brass option.

Stainless Steel ball valve: ideal and practical valves for industrial process and general utility applications 2017-11-16

A few days ago, our customers ordered stainless steel ball valves from our factory, and give us a high praise. our full port Stainless Steel Ball Valves are used in industrial process and general utility applications for a full range of liquids and gases.

Prev 2/4 Next

Have a question or need a sales reply?

Our knowledgeable support team would love to help you out.
Call: 0086-512 65560108 or Email: stevencao@cmecsz.com for assistance.

Company

Products

Get in touch

For any general questions or inquiries, please feel free to contact us!